|
|
Fans, Grilles, Register, Ventilator
Extra-Quiet
Circulating Fan
|
 |
Ah, the sound of silence. This very quiet
fan is ideal for mounting in a doorway
to transfer heat quickly to adjoining
rooms. It's swivel bracket allows airflow
to be directed for ideal heating efficiency and even distribution. Great for eliminating "hot spots".
It has a 12 ft. power cord with an in-
line switch. Hookup is a breeze.
|
| #71925 Extra-Quiet
Circulating Fan |
 |
This plastic fan features two speeds, 60 cfm and 90 cfm, a 10 ft. power cord, and an in-line switch.
5" x 5", cream.
|
 |
Use this cast-iron grille for circulating warm air between floors or adjoining rooms where no fan or vent control is needed.
This black, 12" x 14" grille fits a 10" x 12" opening. It may be used on the "backup side" of a
cast-iron louvered register installation.
|
Cast-Iron Louvered
Register
|
 |
This cast-iron louvered register has loitered vents which
may be closed if desired.
This black register
requires a 10" X 12" opening
for installation. The finished
grille is 12" x 14" |
| #71300 Cast-Iron Louvered
Register |
Click here for more Info |
Air Supply Ventilator
Heres a great solution to many fireplace drafting and/or smoking problems. In today's tighter, more energy efficient homes, sometimes the chimney can't draw sufficient air from inside the home. Then fireplace smoking problems can occur.
The air supply ventilator delivers filtered fresh
make-up air into the home from the outside
thereby providing necessary air for appliances and fireplaces.
It is installed through an outside wall in less
than 30 minutes. No batteries, electrical wiring, or ductwork needed. It works naturally, automatically taking advantage of the negative air pressure inside today's tight homes. It can be shut off at anytime.
To match home decor, the air supply ventilator
can be painted with latex paint. The tough, ABS
molded polymer ventilator includes an exterior
grill, as well as an exterior insect screen.
Three-year limited warranty.
|
| #41800 Air Supply Ventilator |
ThermGuard
Furnace Fan
Activator and
Timer
|
 |
This ingenious and simple device
works with your thermostat to
heat a forced air home more efficiently when the home uses a
wood or gas stove for auxiliary
heat. You set the ThermGuard to
turn on the furnace blower at
specified intervals and duration.
The furnace blower then periodically circulates your auxiliary stove
heat throughout the house without turning on the furnace heat. This can reduce
your heating bill by hundreds of dollars and make your home more comfortable.
|
| #85100 ThermGuard
Furnace Fan
Activator and
Timer |
©2002, CCSI
|
|
| |
